发送询价 找产品首页 找产品分类 切换频道

丝网除沫器

2024-01-19 10:48
价格 面议
发货 浙江台州市
品牌 国涛
主要材质 金属
特性1 加工壁薄
特性2 空隙率大
产品详情

· 作用及原理Function and principle:

丝网除沫器用于分离气体中夹带的液滴,以保证传质效率,降低有价值物料的损失、防止堵塞出口管道、避免危害后续工序和改善设备后的压缩机的操作.上升的液滴靠惯性与丝网碰撞,被丝网拦截;再靠自身的重力下降,并在丝网细丝表面扩散,后在丝网接点处聚集成更大的液滴,回落到设备内。气体通过丝网除沫器后,基本上不含雾沫。
This product is a complete tetrafluoride material frame and screen. It is also one of the best anti-fogging products in the world today. It can be used in any kind of chemical medium for a long time. The PTFE screen defoamer can resist the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid and various organic acids, organic solvents, strong oxidants, and other highly corrosive chemical media. Even the most powerful Aqua regia(a mixture of concentrated sulfuric acid and concentrated nitric acid) has nothing to do with it. The tetrafluoroethylene mesh defogging device can be used normally at temperatures between -150 and +250 °C. This is not what other plastic mesh defoaming products can do.

 

· 规格型号Specification Type:

HG/T21618-1998 丝网除沫器基本参数表:Technical parameter

型号代号
Type
容量重量
Density
(kg/m3)
比表面积
Surface
area
空隙率ε
Void
操作气速
Air flow
压降
Pressure drop
SP168529.60.97880.5-0.8
m/s
<250pa
DP190625.50.9765
HP128403.50.9839

HR

134291.60.9832

 

· 除沫网材质 Material:

金属丝
metal wire
201、304、316、2205、TA2等
201、304、316、2205、TA2 etc
非金属丝
Non metal wire
PP、PTFE、PVDF等
PP、PTFE、PVDF etc
混织
metal + non
metal wire
304&PP、304&玻纤等
SUS 304+PP,SUS 304+Fiberglass etc
包塑金属丝
metal wire coated
with plastic
304外层包PP或PTFEDENG
SUS 304+PP, SUS 304+PTFE etc

 

· 产品特点 Feature :

本产品为全四氟材质框架及丝网,也是当今世界上耐腐蚀性能佳的除雾沫产品之一,它能在任何种类的化学介质中长期使用,丝网除沫器能耐、磷酸、硫酸、硝酸、盐酸和各种有机酸、有机溶剂、强氧化剂以及其它各种强腐蚀性化学介质的腐蚀,就算是厉害的王水(浓硫酸和浓硝酸的混合)也对它无可奈何,丝网除沫器可以在-150~+250℃之间的温度中正常使用,这是其他塑料丝网除沫器产品所做不到的。
This product is a full PTFE frame and wire mesh. It is also one of the best anti-corrosion products in the world. It can be used for a long time in any kind of chemical medium. Teflon wire mesh demister It is resistant to the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid and various organic acids, organic solvents, strong oxidants and other strong corrosive chemical media. Even the most powerful aqua regia (mixture of concen-trated sulfuric acid and concentrated nitric acid) It is also helpless. The PTFE mesh demister can be used normally at temperatures between -150~250 °C, which is not possible with other plastic mesh demister products.


联系方式